Need Receiver Channels used for servos For WFT08 in gato sub.

[danielhill]

Purchased a WFT08 from Caswell and I need to know what channels are used (1-9) for each servo and other devices IE. Lower/Raise Front Planes,Dive and Surface Front Planes, Rudder, Rear Planes, Throttle/Forward-Reverse, Snort, Blow Ballast, ETC...Currently figured out (Channel 7 for Aux-1---Lower /Raise Front Dive Planes) (Channel 8 for Aux2 ---Dive Surface Front Dive Planes. Need Help to Determine What Channels Should Go to each?

Palm Bay Fla.