PDA

View Full Version : Preparing the model for painting



mickelsen
08-16-2008, 07:55 PM
I purchased the Moebius Seaview with the Merriman R/C conversion kits. Its all very nice! On the 4th DVD there is a section called "Filling Seams". I was very anxious to see this part because, as a newbie, I've been quite unsuccessful at getting a good paint job. But I was disapointed when the section stopped in mid sentence with Mr. Merriman using the Evercoat to fill the seams. He never got to using the Nitro Stan or Primer! Is that the way all the disks are? If so, is there another place I can go to get instructions in this area? Does Mr. Merriman have other DVD's or perhaps tapes where he gives instructions on preparing models for painting? I would really appreciate any help I can get in this area.

Thanks,
Mark

Kazzer
08-17-2008, 07:31 PM
PM me your address and we'll get you another one out ASAP.

SteveJ
08-20-2008, 03:21 PM
I also have the same problem. I PM'd you with my name and address. Thanks

Kazzer
08-22-2008, 06:01 AM
I'll be looking at this over the weekend. I do remember one disk ending with Merriman in mid sentence, and hoping no one would notice.

mickelsen
08-22-2008, 08:13 AM
Hi Mike,
I got the new copy of disk 4 and it does the exact same thing: it ends with Merriman in mid sentence. I even went and purchased a new Sony DVD player to see if was my old disk player. It still does the same thing. I probably wouldn't mind if it weren't information that I need so much. I hope you can fix it.

Thanks,
Mark

Kazzer
08-23-2008, 12:31 PM
I spoke with David this morning and he told me he had NOT filmed this part of the procedure. However, he will work on it over the next week or so, so I should be able to give you an update then. I'll announce it on the forum.


Thanks

mickelsen
09-18-2008, 11:08 AM
Hi Mike,

Is there any word on help for us newbies in preparing the hull for painting without seeing seams and scratches?

Kazzer
09-19-2008, 07:51 AM
I'm checking with David now.

Kazzer
09-19-2008, 05:09 PM
David has told me he's going to try to do the missing section this weekend. However, that might not happen, so may I suggest you look at his dvd of the Copeland models.

see http://www.caswellplating.com/models/books.html
and scroll down to the DVD

I could send you all a copy of that FOC?

Boomer
09-23-2008, 07:59 PM
Hi Mike,

Please add my name to the list of Gato Kit folks who needs a corrected CD #4.


Thanks,

Kazzer
10-08-2008, 06:32 AM
I'm going to send you a copy of the Copeland DVDs. They have all this painting stuff in them. Please send me your address