Announcement

Collapse

Forum rules and expectations

Hello, and welcome to the forums at the Nautilus Drydocks, formerly Sub-driver.com!

We welcome anyone with a passion for submarines and a desire to learn and share knowledge about this fascinating hobby. Use of these forums indicates your intention to abide by our code of conduct:


1. No spam. All automated messages, advertisements, and links to competitor websites will be deleted immediately.

2. Please post in relevant sub-forums only. Messages posted in the wrong topic area will be removed and placed in the correct sub-forum by moderators.

3. Respect other users. No flaming or abusing fellow forum members. Users who continue to post inflammatory, abusive comments will be deleted from the forum after or without a warning.

4. No threats or harassment of other users will be tolerated. Any instance of threatening or harassing behavior is grounds for deletion from the forums.

5. No profanity or pornography is allowed. Posts containing adult material will be deleted.

6. No re-posting of copyrighted materials or other illegal content is allowed. Any posts containing illegal content or copyrighted materials will be deleted.
See more
See less

USS Nautilus - Final Edition

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Assembly oft he radar mast from a PU resin part and a photo-etched part:



    The brass net is bend around a 10 mm diameter drill:



    Glue together and paint in the base color:



    The bow planes and the anchor are glued into their respective bulkheads:






    Comment


    • #47
      Detail work on the sail: The mast are painted and glued in the desired position:











      The bow planes are finished as well:




      Comment


      • #48
        Finally the whip antennas are installed on the sail. They are soldered together out of 0,5 mm diameter brass wire and 1 mm diameter brass studs. Paint them black and then glue them into the respective holes in the sail cap:



        The compass repeater gets a decal with the indicators.



        Next are the draft mark and then the boat is ready for getting its clear coat:


        Comment


        • #49
          The painting and weathering of the boat is done and the final 2-component clear coat (matt) is applied. NO comes the fitting of the boat:

          Because of the limited space, the linkages are custom-made. A 3 mm brass tube is hammered even and a 2 mm diameter brass stud is soldered into it. A 3 mm brass set collar is soldered to a 2 mm thick brass linkage and we have it. Needed two times.




          The threads of the propeller shafts are shortened and the props are secured using Loctite blue. The prop shafts are put into the stern tubes using plenty of grease. Everything is secured using set collars.






          The watertight motor units are put into place and secured using M16 brass screws. Latter are locked with a second pair of nuts. Loose cardan joints transmit the torque and allow for thermal expansion:
          #





          Comment


          • #50
            The two servos are secured from below using 3 mm stainless steel screws:



            2 mm brass rods with clevises make the linkage:



            The feedthrough is sealed using Engels rubber bellows:





            Tight fit but doable:


            Comment


            • #51
              To install the dive plane linkage one needs a very long Allen-wrench. Self-made using a 5 mm brass tube and hot glue.





              Thread the linkage onto the dive plane shaft, position it right and tighten the screw. This requires patience:



              The dive planes are glued onto the shaft. To adjust their distance to the hull, 0,2 mm precision stainless washers are used.







              The linkage to the servo shaft is done using a piece of 3 mm diameter brass tube and soldering:



              And this is how the thing works in real:

              https://youtu.be/IHDaBFInKho

              Comment


              • #52
                The linkages to the control planes are done:



                Next is the installation of the pressure switch, which is mounted in a bracket milled out of 5 mm PVC. Itís screwed into place using a M4 thread rod and a distance piece made out of 10 mm thick GRP sheet material:






                Comment


                • #53
                  The 1,5 liter Engel piston tank gets a compact control unit with Hall sensor. To get it actuated in a reasonable time, I chose the 540 motor variant. For this combination, magnets have to be glued onto the main gear wheel. Due to their mutual attraction, gluing the 3 mm x 1mm cylinder magnets directly onto the wheel is rather tricky. Thatís why I chose to fabricate a magnet wheel. The segments are laid down onto 1 mm styrene sheet material. 12 magnets will be used:



                  The magnet positions are drilled with a 3 mm drill bit. The central hole has 9 mm diameter.



                  On a plane plastic sheet treated with release wax the wheel is positioned and the magnets are glued into the respective holes.





                  Let cureÖ

                  Comment


                  • #54
                    After the glue has cured clean the magnet disk from glue residues, cut it into two pieces and glue it onto the main gear of the piston tank. Then put the control unit onto the micro switches:







                    The 540-version of the piston tank has no fix point for the Hall sensor. Therefore one fabricates a L-bracket out of 1 mm brass sheet material:





                    The Hall sensor is screwed into place, a 3mm diameter hole is drilled into the micro-switch board of the piston tank and then the Hall sensor is installed so that the magnets pass closely to the sensor head when the gear turns:





                    Test fit everything in the inner structure:







                    Comment


                    • #55
                      All components are installed and wired. The two Roxxy speed controllers sit left and right of the tank controller. At the front sits the 4100 mAh LiFePo battery. On top of it sits the LiFePo receiver battery and above all the Corona receiver. Next to it there still is enough space for the Engel auto-leveler. Look quite busy but actually itís quite tidy and well accessible:





















                      And because it looks so nice, again the complete boat:


                      Comment


                      • #56
                        That is one Nice Build! Superb
                        IT TAKES GREAT INTELLIGENCE TO FAKE SUCH STUPIDITY!

                        Comment


                        • #57
                          Is this still available for putchase?

                          Comment


                          • #58
                            I have one kit for purchase, yes....

                            Comment

                            Working...
                            X