Announcement

Collapse

Forum rules and expectations

Hello, and welcome to the forums at the Nautilus Drydocks, formerly Sub-driver.com!

We welcome anyone with a passion for submarines and a desire to learn and share knowledge about this fascinating hobby. Use of these forums indicates your intention to abide by our code of conduct:


1. No spam. All automated messages, advertisements, and links to competitor websites will be deleted immediately.

2. Please post in relevant sub-forums only. Messages posted in the wrong topic area will be removed and placed in the correct sub-forum by moderators.

3. Respect other users. No flaming or abusing fellow forum members. Users who continue to post inflammatory, abusive comments will be deleted from the forum after or without a warning.

4. No threats or harassment of other users will be tolerated. Any instance of threatening or harassing behavior is grounds for deletion from the forums.

5. No profanity or pornography is allowed. Posts containing adult material will be deleted.

6. No re-posting of copyrighted materials or other illegal content is allowed. Any posts containing illegal content or copyrighted materials will be deleted.
See more
See less

calling the nameless one

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • calling the nameless one

    waiting for the crack of thunder from the nameless one....please have a look at the progress so far on "im back "for satlite440's vIIc..


    looking for comments on
    1 weight amount
    2 klicon attachment to subdriver pushrods (what does the god recomend so if a pushrod seal ever had to be changed itcan be done without cutting the pushrod...)

    3 what lipo charger does hwsnbn use/recomend....

    4 any shot other than the qucik vidio any pics of the ft bowplane linkage?????


    i will here and obey.....

  • #2
    Gotcha. Got some shop chores to clear out today. I'll get back to you tonight. Promise. Thanks for being patient with me.

    David
    "... well, that takes care of Jorgenson's theory!"

    Comment


    • #3
      Originally posted by satlite440 View Post
      waiting for the crack of thunder from the nameless one....please have a look at the progress so far on "im back "for satlite440's vIIc..


      looking for comments on
      1 weight amount
      2 klicon attachment to subdriver pushrods (what does the god recomend so if a pushrod seal ever had to be changed itcan be done without cutting the pushrod...)

      3 what lipo charger does hwsnbn use/recomend....

      4 any shot other than the qucik vidio any pics of the ft bowplane linkage?????


      i will here and obey.....




      OK, here we are, fresh from the Cave ...

      1. about ten ounces total

      2. CA, as the guys recommend -- you can break the bond with a twist, scrape off the CA residue so you can slide the pushrod through the bad seal

      3. Don't like the one I got so won't recommend it. Let's look .... this one looks promising, http://www.horizonhobby.com/products...er-THP610CACDC

      4. Click image for larger version

Name:	DSCN0135.jpg
Views:	2
Size:	82.0 KB
ID:	81250Click image for larger version

Name:	DSCN0164.jpg
Views:	1
Size:	78.4 KB
ID:	81251Click image for larger version

Name:	DSCN0162.jpg
Views:	2
Size:	95.8 KB
ID:	81252Click image for larger version

Name:	DSCN0158.jpg
Views:	1
Size:	90.4 KB
ID:	81253Click image for larger version

Name:	DSCN0192.jpg
Views:	2
Size:	84.7 KB
ID:	81254Click image for larger version

Name:	DSCN0194.jpg
Views:	2
Size:	86.3 KB
ID:	81255Click image for larger version

Name:	DSCN0196.jpg
Views:	2
Size:	93.8 KB
ID:	81256Click image for larger version

Name:	DSCN0197.jpg
Views:	1
Size:	98.8 KB
ID:	81257Click image for larger version

Name:	DSCN0199.jpg
Views:	1
Size:	102.8 KB
ID:	81258 Sorry, best shots I got.
      "... well, that takes care of Jorgenson's theory!"

      Comment


      • #4
        thanks dave i will keep you posted as i get along.. thank you very much shane

        Comment


        • #5
          Shane

          How is that ballast sub-system servo stuttering going? Still there. We recently identified a bunch of bad 2" SD motors. You might be having that problem. What's up on that front? We're working China right now trying to get in a good batch from another vendor.

          David
          "... well, that takes care of Jorgenson's theory!"

          Comment


          • #6
            THANK YOU FOR REMEMBERING your customer assitance is the best.........it is still present with the ballest servo, after the esc replacement but it was greatly toned down.. it takes over 3/4 throttle now befor it acts up. i thought it was about the best it would get,and i was awaiting to see if you found the issue.. and since we still havent bought the shop an occilascope yet (almost a must for diag modern cars) thats was as far as i could go with diag..but it would show if stray voltage feedback was being absorbed by the esc and backfeeding down the signal line...........


            is there a full fixx for this?????

            btw will you sell a moter bulkhead with moters/servos/ seperate???? how much??? i want to see if i could squeeze in a pair of action electeronics micro esc's with the mixerbord for shaft controll.. to try out in one of my 2 subdrivers...
            Last edited by satlite440; 05-26-2013, 01:19 PM.

            Comment


            • #7
              Originally posted by satlite440 View Post
              THANK YOU FOR REMEMBERING your customer assitance is the best.........it is still present with the ballest servo, after the esc replacement but it was greatly toned down.. it takes over 3/4 throttle now befor it acts up. i thought it was about the best it would get,and i was awaiting to see if you found the issue.. and since we still havent bought the shop an occilascope yet (almost a must for diag modern cars) thats was as far as i could go with diag..but it would show if stray voltage feedback was being absorbed by the esc and backfeeding down the signal line...........


              is there a full fixx for this?????

              btw will you sell a moter bulkhead with moters/servos/ seperate???? how much??? i want to see if i could squeeze in a pair of action electeronics micro esc's with the mixerbord for shaft controll.. to try out in one of my 2 subdrivers...
              That attempted fix on your poor motor bulkhead haunts me still! I think (and you suggested this from the start, but I was so, so much smarter than you, and missed it!) you have one, maybe two of the bad lot motors Mike and I discovered recently. Chinese junk!

              So, you want a 2", two motor bulkhead decked out with everything but the motors? You'll need pushrod and shaft seals, seal foundations, and the like. Sure. Blast me an e-mail with your address. Give me the specifics of what you need, Shane.

              M
              "... well, that takes care of Jorgenson's theory!"

              Comment


              • #8
                sent email through the bord don't know if you got it ,lost your e-mail contact. but mine is [email protected]

                Comment


                • #9
                  "So you want a 2", two motor bulkhead decked out with everything but the motors? You'll need pushrod and shaft seals, seal foundations, and the like."



                  Excuse me waiter, but i'd like to order the same thing he's having.
                  Last edited by redboat219; 06-01-2013, 02:25 AM.
                  Make it simple, make strong, make it work!

                  Comment


                  • #10
                    [QUOTE=redboat219;27411]"So you want a 2", two motor bulkhead decked out with everything but the motors? You'll need pushrod and shaft seals, seal foundations, and the like."



                    Excuse me waiter, but i'd like to order the same thing he's having.[/QUOTE








                    gonna try a mixer??????????

                    Comment


                    • #11
                      Originally posted by satlite440 View Post
                      gonna try a mixer??????????
                      nah, I take my lambanog (coconut moonshine) neat.

                      Want to fabricate my own Type VII SD. Just need a length of 2" OD polycarbonate tubing and motor endcap.
                      Make it simple, make strong, make it work!

                      Comment

                      Working...
                      X