Announcement

Collapse

Forum rules and expectations

Hello, and welcome to the forums at the Nautilus Drydocks, formerly Sub-driver.com!

We welcome anyone with a passion for submarines and a desire to learn and share knowledge about this fascinating hobby. Use of these forums indicates your intention to abide by our code of conduct:


1. No spam. All automated messages, advertisements, and links to competitor websites will be deleted immediately.

2. Please post in relevant sub-forums only. Messages posted in the wrong topic area will be removed and placed in the correct sub-forum by moderators.

3. Respect other users. No flaming or abusing fellow forum members. Users who continue to post inflammatory, abusive comments will be deleted from the forum after or without a warning.

4. No threats or harassment of other users will be tolerated. Any instance of threatening or harassing behavior is grounds for deletion from the forums.

5. No profanity or pornography is allowed. Posts containing adult material will be deleted.

6. No re-posting of copyrighted materials or other illegal content is allowed. Any posts containing illegal content or copyrighted materials will be deleted.
See more
See less

Some videos on how to assemble my 3D printer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #2
    Here's a good video on setting the extrusion rate for your Pruza i3 printer.

    https://youtu.be/w_Wb0i0-Qvo

    I'm still struggling with getting a good extrusion, but it's early days for me, so I'm expecting lots of quirks and failures.

    Here's my first test piece. Scorched, and 'worms'. It looks like the extruder head had a leak, hence the 'worms'. and the scorched look was because the thermister had popped out of the heater block. I'm amazed at the poor design of this, but someone recommended fire cement to hold it in. I need about 1/100th of a thimble full of that stuff.
    Onward! One day! I'll print something useful!
    Click image for larger version  Name:	IMG_0855.JPG Views:	2 Size:	157.3 KB ID:	117121

    Attached Files
    Last edited by Kazzer; 10-29-2016, 07:39 AM.
    Stop messing about - just get a Sub-driver!

    Comment


    • #3
      I found out why every thing got scorched! The tiny thermister had popped out of the hole in the heater block. It's only resting in there and is easily dislodged. There is a screw hole next to the thermister hole and I guess there should be a small screw to secure the leads, but I can't find one.
      Last edited by Kazzer; 11-13-2016, 07:27 AM.
      Stop messing about - just get a Sub-driver!

      Comment


      • #4
        Well! Last night was fun!

        I'd just made a major discovery on how to stop the constant filament jams blocking up my hot-end (yes folks that's what it's called - minds out of the gutter please) It seems that you must let the head heat up first, then press down the ratchet arm on the stepper motor, then push the filament through until it spews out of the nozzle.

        On finishing up, press the rachet arm down, push in the filament until the nozzle extrudes some 2 inches or more, the pull out the filament. Then pull out the extrusion from the nozzle. This will prevent the nozzle being clogged. Just as I figured this out, the fuzzing thing caught fire.

        Unfortunately, the wire was embedded in a loom serving all the switches and stepper motors, so every piece of electronics is compromised
        Click image for larger version

Name:	image_33348.jpg
Views:	1
Size:	216.3 KB
ID:	117368


        Now I'm battling with Ebay for a refund. Damn! I was getting good (er - better) at this. My CAD drawing has improved immensely too. If you haven't tried it, download Autodesk 123D Design.
        Free download software to design 3d models for 3d printing and fabrication for Windows, Mac OS X, iphone, ipad
        Last edited by Kazzer; 11-12-2016, 06:24 AM.
        Stop messing about - just get a Sub-driver!

        Comment


        • #5
          Bearing in mind that I don't know the first thing about propeller design, I decided to 3d print three propellers with the blades at different pitches. Figuring on what I once saw on a British Seagull outboard, I made the blade flat and rectangular. I then changed the pitch to make 3 different props as a trial. These are going to go on a weed whacker to propel my canoe.



          Here's the design of one of them. (and if I hear ONE chuckle from HWSNBN, I'll set my dog on him!)
          I've yet to find out how to put a twist in the blade, but at least this will tell me which pitch is best for the tiny 21cc engine. I've sent the file out to a local 3D printer who is charging me $7.50 to print this 5" diameter prop. That's C H E A P!

          This is FUN guys, everybody should try Autodesk 123D design.
          Last edited by Kazzer; 11-13-2016, 07:30 AM.
          Stop messing about - just get a Sub-driver!

          Comment

          Working...
          X